mbr30h100ct, MBRF30H100CT & mbrb30h100ct series www.kersemi.com 1 reverse voltage 90 to 100v forward current 30a maximum t j 175?c 0.08 (2.032) 0.24 (6.096) 0.42 (10.66) 0.63 (17.02) 0.12 (3.05) 0.33 (8.38) mounting pad layout to-263ab 0.380 (9.65) 0.411 (10.45) 0.320 (8.13) 0.360 (9.14) 0.591 (15.00) 0.624 (15.85) 1 2 0.245 (6.22) min k k 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.014 (0.36) 0.021 (0.53) 0.110 (2.79) 0.140 (3.56) 0.090 (2.29) 0.110 (2.79) 0.047 (1.19) 0.055 (1.40) pin 1 pin 2 k - heatsink 0-0.01 (0-0.254) 0.027 (0.686) 0.037 (0.940) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 1 3 pin 2 0.060 (1.52) 0.405 (10.27) 0.383 (9.72) 0.191 (4.85) 0.171 (4.35) 0.600 (15.5) 0.580 (14.5) 0.560 (14.22) 0.530 (13.46) 0.037 (0.94) 0.027 (0.69) 0.140 (3.56) 0.130 (3.30) 0.350 (8.89) 0.330 (8.38) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.131 (3.39) 0.122 (3.08) 0.110 (2.80) 0.100 (2.54) 0.022 (0.55) 0.014 (0.36) dia. dia. 0.676 (17.2) 0.646 (16.4) 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.095 (2.41) pin 2 pin 1 pin 3 ito-220ab (mbrf30h90ct, MBRF30H100CT) to-220ab (mbr30h90ct, mbr30h100ct) to-263ab (mbrb30h90ct, mbrb30h100ct) 123 pin 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) case 1.148 (29.16) 1.118 (28.40) pin 2 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.160 (4.06) 0.140 (3.56) 0.410 (10.41) 0.390 (9.91) 0.635 (16.13) 0.625 (15.87) 0.415 (10.54) max. 0.370 (9.40) 0.360 (9.14) pin 1 pin 3 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.035 (0.90) 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.095 (2.41) features plastic package has underwriters laboratory flammability classification 94v-0 dual rectifier construction, positive center tap metal silicon junction, majority carrier conduction low power loss, high efficiency guardring for overvoltage protection for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications mechanical data case: jedec to-220ab, ito-220ab & to-263ab molded plastic body terminals: plated leads, solderable per mil-std-750, method 2026 high temperature soldering guaranteed: 250 ? c/10 seconds, 0.25" (6.35mm) from case polarity: as marked mounting position: any mounting torque: 10 in-lbs maximum weight: 0.08oz., 2.24g
mbr30h100ct, MBRF30H100CT & mbrb30h100ct series www.kersemi.com 2 maximum ratings (t c = 25 c unless otherwise noted) parameter symbol mbr30h90ct mbr30h100ct unit maximum repetitive peak reverse voltage v rrm 90 100 v working peak reverse voltage v rwm 90 100 v maximum dc blocking voltage v dc 90 100 v maximum average forward rectified current total device 30 (see fig. 1) per leg i f(av) 15 a peak forward surge current 8.3ms single half sine-wave superimposed i fsm 275 a on rated load (jedec method) per leg peak repetitive reverse current per leg at t p = 2 s, 1kh z i rrm 1.0 a voltage rate of change (rated v r ) dv/dt 10,000 v/ s operating junction and storage temperature range t j , t stg 65 to +175 c rms isolation voltage (mbrf type only) from terminals 4500 (1) to heatsink with t = 1 second, rh 30% v isol 3500 (2) v 1500 (3) electrical characteristics (t c = 25 c unless otherwise noted) parameter symbol value unit at i f = 15a, t j = 25 c 0.82 maximum instantaneous at i f = 15a, t j = 125 c v f 0.67 v forward voltage per leg (4) at i f = 30a, t j = 25 c 0.93 at i f = 30a, t j = 125 c 0.80 maximum reverse current per leg t j = 25 c 5.0 a at working peak reverse voltage (4) t j = 125 c i r 6.0 ma thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol mbr mbrf mbrb unit typical thermal resistance per leg r jc 1.9 4.6 1.9 o c/w notes: (1) clip mounting (on case), where lead does not overlap heatsink with 0.110 offset (2) clip mounting (on case), where leads do overlap heatsink (3) screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19 ) (4) pulse test: 300 s pulse width, 1% duty cycle ordering information product case package code package option mbr30h90ct - mbr30h100ct to-220ab 45 anti-static tube, 50/tube, 2k/carton mbrf30h90ct - MBRF30H100CT ito-220ab 45 anti-static tube, 50/tube, 2k/carton 31 13 reel, 800/reel, 4.8k/carton mbrb30h90ct - mbrb30h100ct to-263ab 45 anti-static tube, 50/tube, 2k/carton 81 anti-static 13 reel, 800/reel, 4.8k/carton
mbr30h100ct, MBRF30H100CT & mbrb30h100ct series www.kersemi.com 3 0.1 0.0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 100 10 0.1 0.01 1.0 1 0.1 10 100 1000 10000 0.01 fig. 3 ?typical instantaneous forward characteristics per leg i r -- instantaneous reverse current ( a) transient thermal impedance ( c/w ) junction capacitance (pf) 1 10 100 100 10000 0.1 10 fig. 5 ?typical junction capacitance per leg reverse voltage (v) 20 100 40 60 80 fig. 4 ?typical reverse characteristics per leg fig. 6 ?typical transient thermal impedance instantaneous forward voltage (v) percent of rated peak reverse voltage (%) t, pulse duration (sec.) i f -- instantaneous forward current (a) t j = 175 c 100 c 125 c 150 c 25 c 0 5 10 15 20 25 30 35 0 25 50 75 100 125 150 175 fig. 1 ?forward derating curve per leg average forward current (a) case temperature ( c) t j = 175 c 150 c 125 c 100 c 25 c 0.1 0.1 0.01 1 1 10 10 100 mbrf30h90ct - MBRF30H100CT mbr30h90ct - mbr30h100ct mbrb30h90ct - mbrb30h100ct 0 50 100 150 200 250 300 1 10 100 fig. 2 ?maximum non-repetitive peak forward surge current per leg number of cycles at 60 h z t j = t j max 8.3ms single half-wave (jedec method) peak forward surge current (a) 1000
|
